Read more about development, updates and other news from dolphitech.
RuDolphicam. Ensuring Santa's sleigh is safe to fly.
December 1, 2022
Bring reliability and consistency to manufacturing processes and seamlessly integrate into your production lines.
October 23, 2022
Aircraft design continues to move toward composites, meaning improved performance for operators but new challenges for maintenance technicians.
August 30, 2022
We are pleased to announce the launch of our new software update Thor bringing you even more power to your non-destructive testing with the dolphicam2.
June 19, 2022
Matrix and Phased Array are two methods of Ultrasonic Testing (UT). There are similarities, but there are also significant differences between them.
June 13, 2022
To ensure correct processes and continued, safe performance of carbon fibre aircraft, Non-Destructive Testing (NDT) is used throughout a product’s lifecycle.
May 22, 2022
The new 0.7 MHz transducer module (TRM) is the first in our X-Series to launch. It is well-suited for the inspection of very thick GFRP sections and low-grade GRP materials.
May 18, 2022
The dolphicam2 provides reliable testing of military assets to keep military forces safe and able to perform.
April 5, 2022
Using carbon fiber-reinforced plastic (CFRP) panel representative of the solid laminate composites on commercial aircraft, such as on a Boeing 787 or on an Airbus A350.
March 3, 2022
Office assistant Stine Lyngmo has brilliantly captured the concept of the MxTTU™ with the devices kissing under the mistletoe.
December 13, 2021
Our new software Odin has landed and brings you powerful enhancements to your non-destructive testing with the dolphicam2.
December 8, 2021
MSG Aviation partner up with dolphitech to deliver high-quality aircraft inspection service
November 24, 2021
Our next-generation digital scanning solution makes the assessment of complex materials – from multiple-bond layers to honeycomb or foam cores – far simpler.
November 15, 2021
Meet the team and see the dolphicam2 in action.
September 20, 2021
We set our sights high and we have space to grow with the UK Space Agency Leo Programme.
September 15, 2021
Dolphitech expands after significant growth
August 31, 2021
A fantastic few days demonstrating the dolphicam2 and dolphicam2+ to the US defense market.
August 9, 2021
The new dolphicam2+ ultrasonic NDT platform is perfectly suited for inspections in service and during manufacturing.
July 13, 2021
We are pleased to announce an addition to our global sales network with INTECH NDE!
June 8, 2021
Welcome to Dr Andy Fisher who has joined the dolphitech management team.
June 1, 2021
Published article in NDT Magazine
May 9, 2021
We have launched an online portal for you to access tailored dolphitech products and information.
May 2, 2021
We've released the 1.4.1 update with improved features to your software which can help improve efficiency. Here is a summary of what you can expect when updating your dolphicam2 software with the 1.4.1.
April 25, 2021
PROVIDING PREDICTIVE TURBINE MAINTENANCE AND BLADE INSPECTION SERVICES TO THE WIND INDUSTRY
March 29, 2021
This year we have been joined by many new faces and that’s not all, our team has grown in experience and expertise.
March 18, 2021
The 1.4 update provides improved functionality that will dramatically improve ease of use and speed up your inspection workflow, from opening the settings right through to saving a report.
January 29, 2021
Ultrasonics technology leader dolphitech establishes new UK base
December 10, 2020
A NDT (Non-Destructive Testing) procedure for the dolphicam ultrasound camera system has been made available for the Airbus A350 composite aircraft.
October 23, 2020
The platform will be ready to use in 60 seconds, increasing efficiency and saving you valuable time between site visits. No more downtime while calibrating your hardware either.
September 23, 2019
dolphitech supported Smart NDT in their exhibition room.
May 18, 2019
Today, dolphitech was awarded the ISO9001:2015 certificate.
May 18, 2016
Norway-based ultrasound camera developer dolphitech, which was founded in 2009, has developed the dolphicam1 – a mobile and ergonomic ultrasound NDT camera – specifically testing composite materials.
May 19, 2015
Dolphicam ultrasound inspection camera and dolphitech Teamcenter software are selected as the recommended NDT tool for structural inspections on carbon fibre primary automotive structures.
January 16, 2015